Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Feliz
Gate installation in Los Feliz runs $4,200 to $18,500 for a typical driveway gate, depending on whether you’re replacing a single swing gate on a flat lot or fabricating a custom double gate for a hillside driveway above Franklin Ave. We complete most installations within two to three weeks of the signed quote, and a live person answers every call at (442) 255-3886. If you live in the Los Feliz hills or Los Feliz Estates tract, you already know the difference between a gate contractor who understands slope engineering and one who does not. We are the former, and we have been doing this work for over 42 years.
Why Ironworks Gate Co. Is Los Feliz’s Preferred Gate Installation Company
Los Feliz homeowners tend to be particular about their gates. They should be. The 1920s and 1930s Spanish Colonial Revival and Mediterranean Revival estates climbing toward Griffith Park carry architectural weight that flat-grid neighborhoods like East Hollywood simply do not have. When we install a gate on a property like that, we match the scrollwork, the picket profile, and the finish to the original ironwork. Not close. Exact.
Our crew has fabricated and installed gates throughout Los Feliz, from the Los Feliz Estates tract near Griffith Park to the quieter streets south of Los Feliz Boulevard. We know the pilasters on these older homes often have deteriorating mortar around the hinge anchors. We know the driveway grades. And we know that the correct gate operator on a 14% grade is a different machine than what you would put on a flat lot in Silver Lake. That local knowledge is why homeowners here call us first, and why our Gate Installation team is the one Victor Salinas sends out when the job demands precision.
Victor Salinas leads every install personally. He has been at this for decades, and he trains each technician the way he was trained: measure twice, weld once, and never leave a gate that creeps, sags, or slams. When you call, you will get a background-checked, uniformed technician who respects your home. Every job is protected by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Our Gate Installation Services in Los Feliz
Driveway Gate Installation
A driveway gate in Los Feliz is usually either a replacement for an original 1920s or 1930s gate that has finally worn past the point of welding, or a first-time installation on a property that has gone without one. Most of our driveway gate work here involves custom fabrication to match existing ironwork, and we spec the operator for the actual grade of the driveway, not a catalog default. On hillside lots above Franklin Ave, that means a high-torque operator with a mechanical brake so the gate holds its position instead of drifting with gravity.
Swing Gate Installation
Single-swing gates are the most common style in Los Feliz, and they are also the style most likely to fail on a steep grade. When we install a swing gate here, we set the hinge posts in engineered footings sized for the gate’s weight plus lateral wind load. The Santa Ana winds that funnel down through Griffith Park each fall hit a large ornamental gate broadside. Our post footings are built to take that load without shifting, which is not something every installer accounts for.
Sliding Gate Installation
On tighter Los Feliz frontages where a swing gate would arc into the street or a retaining wall, a sliding gate is often the better answer. We install sliding gates with heavy-duty track and roller systems rated for the specific gate weight, and we set the track on a concrete base that will not settle or crack with the wet-dry seasonal cycle we get here. For steep driveways where a slide is not practical, we will tell you that honestly and recommend the right alternative.
Security Gate Installation
Driving through Los Feliz, you see a lot of ornate iron that is also doing serious security work. A 6-foot wrought iron driveway gate with a keypad and camera integration is standard for the hillside estates here. We install security gates with reinforced frames, tamper-resistant hinge pins, and automation that ties into your existing intercom or access system. We will also walk you through the entrapment protection requirements, which are not optional in California and which we install on every automatic gate we build.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Feliz
We are trained and equipped on nine gate-automation brands, and for Los Feliz installations we most often specify LiftMaster, FAAC, and BFT. LiftMaster’s high-torque operators with mechanical brakes are the right call for the steep grades we see above Franklin Ave. FAAC is our go-to for hydraulic operators on heavy estate gates. BFT handles mid-weight double swing gates cleanly. We stock common replacement parts locally, so if an operator needs attention after installation, we are not waiting on a shipment from out of state. We are back in your driveway.
Common Gate Installation Problems We See in Los Feliz Homes
- Aging hinge anchors pulling out of masonry pilasters. The original pilasters on 1920s and 1930s Los Feliz estates were built with mortar that has now spent a century in the weather. When lateral Santa Ana wind stress hits a large gate, the hinge bolts start working loose, and eventually the anchor tears out of the masonry. The fix is not just longer bolts. It is rebuilding the pilaster core or setting new post footings, depending on what we find.
- Gravity torque on hillside driveways. This is the Los Feliz signature problem. On grades over 10-15%, a single-swing gate that is slightly out of balance will self-open downhill or slam shut, and every cycle bends the hinges a little more. The correct fix is either a dual-swing conversion or a high-torque operator with a mechanical brake, never just a hinge swap.
- Rust jacking at the base rails of ornamental wrought iron. Lower hillside lots in Los Feliz concentrate runoff, and the wet-dry seasonal cycle forces rust to expand inside the base rail seam, which jackets the metal apart and racks the whole panel. We see this most often on original gates that face the downhill side of a property. When we install new, we treat the base rail internals and set the gate on standoff hinges so water has a place to go.
- Undersized operators on heavy custom gates. A handyman will sell you whatever operator he has on the truck. We spec the operator for the actual gate weight, width, wind load, and usage cycles. A heavy double swing gate on a windy hillside in Los Feliz needs a different class of machine than a light pedestrian gate in West Hollywood.
Pricing for Gate Installation in Los Feliz, CA
Here are honest numbers for the Los Feliz market. A single-swing driveway gate replacement on a flat or gently sloped lot typically runs $4,200 to $7,800. A custom double swing gate with ornamental fabrication, engineered post footings, and a high-torque operator on a steep hillside driveway runs $9,500 to $18,500. A pedestrian gate with matching ironwork runs $2,000 to $4,800. A sliding gate install runs $6,500 to $14,000 depending on gate weight and track length. The price we quote is the price you pay. We settle it before a single bolt is turned, and every quote includes the entrapment protection required by California law. Call (442) 255-3886 for a free written estimate. No surprises on the bill.
We Also Serve Cities Near Los Feliz
While this page covers Gate Installation in Los Feliz, our crews also serve West Hollywood, Beverly Hills, Silver Lake, and Echo Park. Dispatch and scheduling are coordinated from the brand’s Los Angeles office, so we can usually get a technician to any of these areas the same week you call.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Feliz
That drifting is gravity torque working against worn hinge posts on a driveway grade over 10%, and it is the most common hillside gate failure we diagnose in Los Feliz. The gate’s own weight pulls it downhill once the hinge bearings wear enough to let it move, and every cycle compounds the wear. The correct fix is usually a dual-swing conversion or a high-torque operator with a mechanical brake. A hinge swap alone will not hold the gate on a sustained grade. Call (442) 255-3886 and we will come out and tell you exactly what your gate needs. Estimates are free.
Yes, we match original wrought iron scrollwork, picket profiles, and finish on Los Feliz estate gates every month. Our fabrication shop can replicate period-correct details from the 1920s and 1930s, including the heavier bar stock and hand-forged scroll ends typical of Spanish Colonial Revival and Mediterranean Revival properties. We have matched dozens of original gates in the Los Feliz Estates tract and the hills above Franklin Ave. Bring us a photo or let us take measurements on site.
Yes, every new automatic gate installed in Los Feliz requires entrapment protection under California law, and we install it on every job without exception. That means safety photocells across the gate opening, an audible alarm or reversing feature, and in many cases contact sensing edges on the gate itself. We would never install a gate without it, no matter what another contractor might tell you. It is part of our standard quote, not an add-on.
We keep a heavy sliding gate quiet by starting with the foundation. On a steep Los Feliz driveway, the track needs a reinforced concrete base that will not settle or crack with the wet-dry seasonal cycle, and the rollers need to be rated for the gate’s actual weight with margin. We also align the gate on the track so it does not bind at the guide posts, which is where most noise from sliding gates actually comes from. You should hear the motor, not the metal.
Santa Ana winds will damage a double swing gate in the Los Feliz hills only if the hinges and posts were undersized for the wind load, which is a common problem with cheaper installations. We engineer our post footings and hinge hardware for sustained lateral load from the fall wind events that funnel down through Griffith Park. We also spec the operator’s force and brake settings to hold the gate closed without fighting the wind through the motor. If you are concerned about wind exposure on your specific street, call us and we will look at it before quoting.
Call Ironworks Gate Co. for Gate Installation in Los Feliz
If you live in Los Feliz and you are planning a gate installation, call (442) 255-3886. A live person answers, 24 hours a day, 7 days a week. We will schedule a free measure, talk through your options for the grade and the architecture of your property, and give you a written price before any work begins. Victor Salinas and the crew at Ironworks Gate Co. have been doing this work right for over 42 years, and every job is backed by our 90-Day Done Right Promise. A square deal, done right, and guaranteed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Feliz and surrounding communities.