Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across West Hollywood
Gate installation in West Hollywood means working with the city’s own permit office, sourcing hardware that holds up to marine-layer salt, and knowing the difference between a 1960s dingbat carport entry and a steel gate on a Sunset Strip estate. A new driveway or pedestrian gate in West Hollywood typically runs $3,200 to $9,800 installed, depending on size, automation, and whether the existing posts can be reused. Ironworks Gate Co. has been doing this work for over 42 years, and our crews serve West Hollywood directly from our Los Angeles office. Call (442) 255-3886 for a free estimate, and you will speak to a live person, not a voicemail tree.
Why Ironworks Gate Co. Is West Hollywood’s Preferred Gate Installation Company
We are not a general handyman service that occasionally hangs a gate. We are a dedicated gate specialist, and most of our West Hollywood work comes from building owners and homeowners who have already been burned by a contractor who pulled the wrong permit or installed hardware that failed within a year. Our background-checked, uniformed technicians work the way they would in their own mother’s home, and every job is protected by the 90-Day Done Right Promise: a written guarantee that if it is not right, we come back and make it right. No paperwork, no arguing, no exceptions. That is the Keystone Standard, and it applies to every gate we install.
West Hollywood customers call us because they remember the last contractor who let them down. They are not shopping for the cheapest bid. They want the job done once, done correctly, and guaranteed in writing. Victor Salinas, who leads our team, built Ironworks Gate Co. on exactly that principle: a square deal, an upfront price, and a company that plans to be in town for another forty years.
Our Gate Installation Services in West Hollywood
We install every type of gate West Hollywood buildings need, from pedestrian gates on courtyard apartments to full vehicular security gates on multi-tenant properties. Each job starts with a free measure and a written price agreed before a single bolt is turned. We never start work without you knowing the full cost.
Driveway Gate Installation
Driveway gates in West Hollywood usually serve tuck-under carports or narrow side entries cut into hillside lots. On 1950s to 1970s dingbat apartments, the gate is often the only thing between a resident’s car and the street, so we size operators correctly for daily cycle counts that would wear out a residential-grade motor within two years. A typical automatic driveway gate in West Hollywood runs $4,500 to $9,800 installed, including operator, safety edges, and permit handling where required.
Pedestrian Gate Installation
Pedestrian gates off Santa Monica Boulevard, Fountain Avenue, and the smaller side streets serve everything from 1920s courtyard apartments to private entries on Norma Triangle homes. We weld and install steel pedestrian gates with stainless hardware as standard on coastal-facing properties, because standard zinc-plated hinges will not survive more than a few years of marine-layer moisture. Expect $1,200 to $3,400 for a welded steel pedestrian gate installed, depending on width and whether we need to set new posts.
Sliding Gate Installation
Sliding gates are the workhorse of West Hollywood apartment buildings with tight carport clearances. There is no room to swing a gate out over the sidewalk when the building sits six feet from the property line, so a cantilever or track-style slide gate keeps the entry clear and the city happy. We install slide gates with galvanized steel frames and stainless fittings as the baseline near the coast, because a painted steel slide gate will rust through its track hardware in three to five seasons of West Hollywood marine air. Sliding gate installations typically run $5,000 to $11,000 including automation and safety loops.
Swing Gate Installation
Swing gates are most common on the single-family and estate properties north of Sunset Boulevard, where lot depth allows a gate to arc inward over the driveway. The failure point on West Hollywood swing gates is almost always the hinge post: decades of salt-laden air rust the post at the base, the gate sags, and the operator board burns out trying to move a misaligned load. That is why we set galvanized post footings and use sealed bearing hinges on every coastal swing gate we install, never raw steel. Budget $4,000 to $8,500 for a new automated swing gate in West Hollywood.
Double Gate and Security Gate Installation
Double gates and security gates serve West Hollywood buildings where residents expect controlled access every time. A 12-unit building off Santa Monica Boulevard cannot afford a gate that fails open at 2 a.m. We install double-leaf and security gates with backup release mechanisms, keypad or intercom integration, and operators from brands we actually stock parts for. Security gate installs in West Hollywood typically range from $6,000 to $14,000, depending on pedestrian separation, access control, and the condition of the existing opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We are trained and equipped on nine gate-automation brands, but for West Hollywood’s coastal conditions we lean on operators with sealed control boards and corrosion-resistant housings. LiftMaster, FAAC, BFT, and Mighty Mule are the names you will most often find on our trucks, because we carry replacement boards and remotes for them locally. That means faster turnaround when a building owner calls us about a gate that will not close. If your West Hollywood building has an older opener from another brand, we can usually source and service it too, often in a single visit. See our Gate Installation page for the full scope of what we install and service.
Common Gate Installation Problems We See in West Hollywood Homes
West Hollywood’s climate and housing stock create a specific set of gate failures, and we see them every week. These are the ones that send building owners to us most often:
- Rusted hinge posts on swing gates. Salt-laden marine air works into the post base over decades, and the gate starts to sag and bind. By the time a resident notices, the operator board is usually already being stressed hard every cycle. We replace the post with galvanized steel and set it in concrete with proper drainage so it does not happen again.
- Obsolete loop detectors failing intermittently. Many West Hollywood apartment gates still run on first-generation induction loops installed in the 1980s or 1990s. During marine-layer condensation, a degraded loop can fail to detect a car, leaving the gate stuck open or refusing to open at all. We replace old loops with modern detector systems that do not care about moisture.
- Powder-coat failure on south- and west-facing gates. The UV load on those exposures is intense, and the finish breaks down years faster than inland. Bare metal sits in salt air, and corrosion follows fast. When we install, we specify marine-grade powder coat or galvanized steel with stainless fixings for any gate face that gets direct afternoon sun.
- Original 1960s wiring that shorts the new operator. Dingbat apartment buildings in West Hollywood frequently still have original cloth-insulated wiring running to the gate. A new operator on old wiring is a recipe for short circuits and repeated failure. We run new conduit and conductors as part of any install where the existing feed is suspect.
Pricing for Gate Installation in West Hollywood, CA
Gate installation in West Hollywood is not a one-price trade. The building stock ranges from 1920s courtyard apartments to high-end estates, and the access, wiring, and permit situation changes the number. That said, here are working ranges for what we charge in this market:
- Pedestrian gate, steel, installed: $1,200 to $3,400
- Automated driveway swing gate: $4,000 to $8,500
- Sliding gate with automation and safety loops: $5,000 to $11,000
- Double gate with access control: $6,000 to $14,000
- Full replacement including new posts, conduit, and permit handling: add $1,200 to $2,800 depending on scope
Every price is quoted and agreed in writing before we start. No surprises on the bill. We also honor standing offers for West Hollywood customers, including $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (442) 255-3886 and we will give you an exact number.
We Also Serve Cities Near West Hollywood
Our crews serve West Hollywood and the surrounding area, including Beverly Hills, Studio City, North Hollywood, and Culver City. If you own a building in one of those cities and need the same level of gate expertise, our West Hollywood team can coordinate the work from the same dispatch desk.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in West Hollywood
Yes, for most automatic gate installations on multi-tenant properties, the City of West Hollywood requires a permit through its own Community Development Department, not LA City’s LADBS. This is a distinction that catches out contractors who assume all of Los Angeles County uses the same portal. We handle West Hollywood’s separate permitting process as part of the job, before the old gate is even off its track. Call (442) 255-3886 and we will confirm what your building needs.
The marine layer means regular moisture and salt-laden air, so you want galvanized steel or marine-grade aluminum, never raw painted steel. South- and west-facing gates also take heavy UV, which breaks down powder-coat faster than inland. We spec galvanized frames with stainless steel hinges and fixings on any West Hollywood gate that faces the coast. That combination is what actually survives here.
Yes, we can install a modern operator, but we will run new electrical conduit and conductors to the gate first. Installing a new LiftMaster or FAAC board on 60-year-old cloth-insulated wiring is the reason the opener keeps shorting in the first place. We do the full job, not just the motor swap. Call (442) 255-3886 for a free assessment of your building’s wiring.
The hinge post fails first, almost every time. Salt-laden moisture works into the base of the post over years, the gate sags, and the motor burns out trying to move a load it was never sized for. The panel usually looks fine while this is happening. We replace failed posts with galvanized steel set in concrete, and we spec stainless hinges so the new gate stays true. That is the repair we made on a 1960s dingbat building off Santa Monica Boulevard recently, where the original posts had rusted clean through.
We treat a failed gate on a multi-tenant West Hollywood building as an urgent job, because a dozen or more residents lose secure parking access the moment the gate fails. Our crews are dispatched from our Los Angeles office and can typically reach West Hollywood properties the same day. You will speak to a live person at (442) 255-3886, 24 hours a day, and we will tell you exactly when we can be there.
Call Ironworks Gate Co. for Gate Installation in West Hollywood
If you own a building in West Hollywood with a gate that needs to be replaced, or you are planning a new gate and want it done right the first time, call us at (442) 255-3886. You will talk to a live person. We will schedule a free measure, give you a written price before any work starts, and stand behind the finished job with our 90-Day Done Right Promise. The 400th job gets the same care as the first. That is how we have done it since 1984, and how we will do it for the next forty years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving West Hollywood and surrounding communities.