Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills runs $2,800-$9,500 for a standard driveway gate with operator, and $4,500-$18,000+ for custom ornamental ironwork matching a period estate. Most standard installations are completed in one to two days once permits clear, and we quote the full price in writing before any work begins. If you live in the flats, the hills above Sunset, or anywhere between, call (442) 255-3886 and a live person answers, day or night.
Beverly Hills is our backyard. We know the building inspectors, the permit counter, and the 1920s pilasters on Rexford. We know which operators survive the marine layer on Coldwater and which ones cook their boards during a Santa Ana. This page explains what gate installation actually costs here, what the city requires, and how we handle the older gates and legacy operators that dominate this town. For a broader look at what we do, see our Gate Installation team’s full scope of work.
Key Takeaways for Beverly Hills Homeowners
- Beverly Hills has its own Building & Safety division. Gate operators and structural modifications need city-specific permits and inspections. We handle the paperwork.
- Older pilasters are the weak link. Original 1920s-1950s brick and stone posts were never engineered for a 400-pound automated panel. Reinforcement is usually the right call.
- Your gate may be killing its operator. Custom panels added over decades often run a residential motor at double its rated capacity. We check weight and load before quoting.
- Salt air and Santa Anas matter. Coastal oxidation and sudden wind loads change what hardware belongs on a Beverly Hills gate.
- Every job is covered by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Why Ironworks Gate Co. Is Beverly Hills’s Preferred Gate Installation Company
Ironworks Gate Co. has been hanging and automating gates since 1984. That is 42 years of field calls across Los Angeles, and Beverly Hills has always been one of the streets we know best. We are not a handyman with a welder in the back of a pickup. We are a dedicated gate company: welding craft on one side, certified automation work on the other, and a written guarantee on every finished job.
Our technicians are background-checked, uniformed, and trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Beverly Hills, where a driveway might have a 1998 DoorKing swing arm on Monday and a newer FAAC slide operator on Wednesday. We fix what is there and install what belongs.
Victor Salinas leads our crews, and he runs every job to the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. When you call (442) 255-3886, you get a live person, not a voicemail tree.
We also stand by our prices. The quote you approve is the price you pay. There is no surprise invoice at the end of a Beverly Hills job. That is a square deal, and it is how we have stayed in business for over four decades.
Our Gate Installation Services in Beverly Hills
Driveway Gate
A driveway gate in Beverly Hills is rarely a stock item. The estate homes south of Santa Monica Blvd and the canyon compounds above Sunset use custom ornamental panels, and the gate has to match the house or it looks wrong from the street. We fabricate, hang, and automate driveway gates that fit the architecture: Spanish Colonial Revival, Tudor, Georgian, or modern. We also handle the structural side: reinforcing pilasters, pouring deeper footings, and setting posts so the gate does not sag in year three.
Pedestrian Gate
Pedestrian gates around Beverly Hills properties get used hard, from gardeners on Tuesday mornings to delivery drivers all week. They need hardware that holds up. We install and harden pedestrian gates with commercial-grade hinges, closers, and, where the property calls for it, Beverly Hills Gate Access Control with electric strikes tied into the same access system as the driveway. These are smaller jobs, but we treat them with the same care as a full estate gate.
Sliding Gate
Sliding gates work well on Beverly Hills driveways with limited swing room or steep grades. But the hillsides north of Sunset punish standard sliding gate tracks. A rack and pinion on a 12% grade will wear out quickly if the track is not set properly for the slope. We configure slide gates for the actual grade of your driveway, not the grade a catalog assumes. We also stock rollers, racks, and gearboxes for the brands already on your property.
Swing Gate
Swing gates are the classic Beverly Hills look, and they remain our most-requested installation style. They work beautifully, except when they are hung on original brick pilasters that were never reinforced. We regularly see hinge posts that have cracked behind the mortar line because a heavy panel has been swinging on them for decades. We reinforce the post, fabricate custom brackets, and set the operator so the gate moves smoothly without stressing the structure.
We also install security gates for Beverly Hills homeowners who want more than a visual deterrent: taller panels, locked access, and automation that ties into whole-home systems. And we never lose sight of the fact that this is your home, not a commercial lot. The gate should close quietly, look right from the curb, and work every time. For the full scope of our gate installation work, see Gate Installation.
When you need someone who knows Beverly Hills specifically, we are the crew that can be at your driveway with the right parts and the right answer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We install and service nine major automation brands, including LiftMaster service in Beverly Hills, FAAC, BFT, and Mighty Mule. Because we stock common parts for these brands, most jobs are completed in a single visit. That means no second trip back to the shop and no week-long wait for a control board. In Beverly Hills, where a non-functioning gate can mean a blocked driveway on a busy morning, single-visit service matters. Victor Salinas keeps the truck inventory set for this area’s needs. We know what fails here and we carry the fix.
Common Gate Installation Problems We See in Beverly Hills Homes
- Pilaster failure on original brick and stone. The 1920s-1950s posts on Beverly Hills flats were built for a decorative gate, not a 400-pound automated panel. We see leaning posts, cracked mortar, and hinge bolts that have started to pull free. Fixing this means custom steel brackets and a deeper footing, not just a bigger lag bolt.
- Operators running at double their rated weight. A gate that looks pristine can be silently killing a residential motor. Owners add custom ironwork over decades without upgrading the operator. The motor burns out, and the owner blames the motor. We weigh the panel first.
- Slope-driven track and arm misalignment. The curving, steep driveways north of Sunset force standard slide tracks and swing arms out of plane. Rack and pinion wear accelerates, arms bind, and the gate starts shrieking. Slope-specific mounting and bracket engineering solves it.
- Coastal oxidation from the marine layer. Beverly Hills sits five to six miles from the Pacific. Seasonal marine air and canyon shade keep north-facing hardware damp, and salt accelerates rust on exposed hinges, operator arms, and control enclosures. We spec coated, sealed, and stainless hardware where it belongs.
Pricing for Gate Installation in Beverly Hills, CA
Here is what gate installation actually runs in Beverly Hills, as of 2026.
| Job Type | Typical Range |
|---|---|
| Pedestrian gate, standard steel, hung on existing posts | $1,200-$3,500 |
| Driveway gate, single swing, including operator | $2,800-$6,500 |
| Driveway gate, double swing, including operator | $4,200-$9,500 |
| Custom ornamental driveway gate, matched to period architecture | $6,000-$18,000+ |
| Safety edge, photocell, and loop detector retrofit on existing gate | $900-$2,400 |
| Pilaster reinforcement and new steel post, including footing | $1,500-$4,000 |
What moves the number: gate weight, panel material, post condition, driveway grade, operator brand, and whether the city requires engineering or a plan check. Beverly Hills permits and inspections add cost, but we handle them and tell you the total before you approve anything. Every quote is free, written, and locked. Call (442) 255-3886 and we will measure and price the job on-site.
We Also Serve Cities Near Beverly Hills
Our crews serve Beverly Hills and the surrounding area, including West Hollywood, Culver City, Studio City, and Sherman Oaks. If your home is in one of those neighborhoods, we can usually schedule you within the same week. The same written 90-Day Done Right Promise applies to every job, no matter the city.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes. Beverly Hills runs its own Building & Safety division, separate from Los Angeles County, and gate operators plus most structural gate modifications require a city permit and inspection. This is not the case in West Hollywood or unincorporated LA County, so contractors who mostly work in those areas sometimes get surprised at the counter. We pull the permit, schedule the inspection, and make sure the job passes. Call (442) 255-3886 and we will walk you through the timeline.
Yes. We have done this on Spanish Colonial Revival and Tudor estates throughout the flats, south of Santa Monica Blvd and up into the canyons. The safety additions, photocells, edges, loop detectors, can be mounted low, hidden behind pilasters, or integrated into the gate frame so they do not change the period look. On one Beverly Hills flats estate, we replaced a failing LiftMaster swing operator with a new FAAC unit, fabricated a steel anchor bracket for the original brick pilaster, and added photocells and a loop detector, all before the inspector arrived. The gate looked the same from the street; it just worked safely.
Almost always because the panel is heavier than the operator was rated to move. Beverly Hills estate owners add custom ironwork over the years, and the motor, often a 15-year-old residential unit, ends up running at 140 to 200 percent of its designed capacity. The motor burns out, you replace it, and the new one burns out too because the load never changed. We specialize in Gate Repair in Beverly Hills that actually fixes the root cause. We weigh the gate, check the pilasters, and either re-rate the operator or lighten the panel. That is the fix that lasts. Call us for a free load check.
Yes. The steep, curved driveways in the hills north of Sunset force standard slide tracks and swing arms out of alignment, which causes premature rack and pinion wear, sagging, and binding. We set slide gates for the actual driveway grade, spec heavy-duty rollers and tracks where needed, and mount swing arms on reinforced brackets that handle the grade. Most off-the-shelf kits are not rated for these conditions. We quote the correct engineering, not the cheap workaround.
We use sealed control enclosures, stainless or coated fasteners, and corrosion-resistant operator arms on any Beverly Hills job. The marine layer sits close enough, especially on north-facing or canyon-shaded gates, that bare ferrous hardware rusts fast. We also plan for drainage so moisture does not pool in the operator housing. If you are replacing a rusted-out operator, call (442) 255-3886 and we will spec hardware that survives this climate.
Call Ironworks Gate Co. for Gate Installation in Beverly Hills, CA
If you need a new driveway gate, a retrofit on a 1940s ornamental panel, or an operator that can actually handle the weight, we are the crew to call. The estimate is free, the price is locked before we start, and every job is covered by our written 90-Day Done Right Promise. Victor Salinas and the team are a phone call away. Call (442) 255-3886 now.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Beverly Hills since 1984.