Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Los Feliz
Gate repair in Los Feliz almost always means working on a gate that was built before World War II, hung on a hillside, and expected to run like it was installed yesterday. Most driveway gates in this neighborhood swing on hinges anchored into 1920s and 1930s stucco pilasters, on grades that climb steeply toward Griffith Park. When one fails, it fails in ways flatland gate services don’t recognize. We do. Ironworks Gate Co. has repaired, rebuilt, and restored gates on the hillside streets above Franklin Avenue, in the Los Feliz Estates tract, and across the flats south of Los Feliz Boulevard. Call (442) 255-3886 and a live person answers, day or night. We’ll tell you what’s wrong, what it costs, and when we’ll be there.
Key Takeaways:
- A typical gate repair in Los Feliz runs $220-$480 for hinge and alignment work, $350-$850 for operator or motor repair, and $900-$2,400 for a full rebuild or replacement on steep grades.
- Most Los Feliz gate repairs are diagnosed and completed in one visit.
- Every job is backed by a written 90-Day Done Right Promise. Victor Salinas stands behind it personally.
- We service nine opener brands, including LiftMaster, FAAC, and Mighty Mule, and carry common parts on our trucks.
- The price is quoted and agreed before any work starts. No surprises on the bill.
Why Ironworks Gate Co. Is Los Feliz’s Preferred Gate Repair Company
Homeowners in Los Feliz tend to be done with contractor roulette. They’ve lived in their homes for twenty, thirty, sometimes fifty years. They know the difference between a repair that lasts and one that holds for a season. That’s the customer we built this company for. We’re a dedicated gate specialist, not a handyman with a pickup truck and a vague idea about motors. We’ve been at this work for over 42 years, and our repair crews are trained and certified on nine major gate-automation brands, including LiftMaster, FAAC, and BFT, so the diagnosis made on the first visit is the right one.
Our reputation in Los Feliz is built on a simple premise: show up when we say, fix the gate properly, and put the guarantee in writing. Customers up in the Los Feliz hills and down near Hillhurst Avenue call us back because the gate that sagged for six months finally closes square, and it stays that way. We complete most repair jobs in a single visit, with upfront pricing settled before a single bolt is turned. A background-checked, uniformed technician does the work. The 90-Day Done Right Promise is not marketing language. It’s the Keystone Standard, and it applies to every job, from a hinge replacement to a full operator rebuild. Victor Salinas, our owner, expects the 400th job to receive the same care as the first.
Scheduling and dispatch for Los Feliz are coordinated from our Los Angeles office, and our crews know the neighborhood without consulting a map: the winding grades above Franklin Avenue, the estate driveways off Los Feliz Boulevard, the tight side streets near the Greek Theatre. We don’t send a technician who has never worked on a 15% grade and has no feel for period ironwork. Every call is answered by a live person, 24 hours a day, 7 days a week. No voicemail trees, no callback queue.
Our Gate Repair Services in Los Feliz
Most calls from Los Feliz homeowners are about gates that sag, drift, resist the motor, or refuse to open at all. We handle the full scope: the iron, the hinges, the motor, the controls. Here’s what that looks like in a neighborhood built on hillsides.
Electric Gate Repair
Electric gate repair in Los Feliz often comes down to an operator that’s being asked to do too much on too steep a grade. When a single-swing driveway gate on a 12% or 15% slope starts fighting its operator, the motor burns out, the gears strip, or the control board throws faults. We diagnose the gate, the hinges, and the operator as one integrated system. Sometimes the fix is a new capacitor or limit switch. Sometimes it’s a high-torque LiftMaster or FAAC operator with a mechanical brake and slope compensation. Either way, we spec the repair for the actual grade, not for a flat driveway in East Hollywood.
Automatic Gate Repair
An automatic gate that won’t close, beeps but doesn’t move, or stops halfway across its arc is usually signaling that something in the drivetrain or the safety circuit has failed. In Los Feliz, the problem is frequently compounded by the age of the gate itself and the condition of its supporting posts. We test the photo eyes, the loop detector if there is one, the battery backup, and the gear assembly. We service LiftMaster, FAAC, Mighty Mule, BFT, and five other major brands, and we carry a working stock of common parts on the truck, so most repairs are finished the same day.
Hinge & Post Repair
This is the repair most specific to Los Feliz’s housing stock. The 1920s and 1930s Spanish Colonial Revival and Mediterranean Revival estates that climb toward Griffith Park were almost always built with masonry or stucco pilasters. Heavy wrought iron gates were hung on hinge straps anchored directly into that masonry. Eighty or ninety years later, the mortar has softened, the anchors have loosened, and the gate sags until it drags on the driveway or binds against the post. Replacing a hinge on that setup doesn’t fix the problem. The anchor bed has to be rebuilt, the post plumbed, and the hinge geometry reset. Gate Repair on original Los Feliz pilasters is a structural job as much as a mechanical one. We treat it that way.
Gate Realignment
On the steeper residential streets above Franklin Ave, gravity never stops working. It pulls on single-swing gates, settles posts, and slowly distorts the alignment until the gate drags, binds, or latches incorrectly. Gate realignment means resetting the hinge plane, rebalancing the leaves, and in many cases converting a single swing to a dual-swing configuration so the operator isn’t fighting a dead load forever. It requires a hydraulic level, a chain come-along, and an honest feel for how steel behaves under sustained load. We do this work regularly in Los Feliz.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Feliz
Whatever operator is on your driveway, there’s a good chance we’re already trained and equipped to service it. Our technicians hold certification on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Los Feliz, we see a lot of LiftMaster operators on newer remote-entry estate gates, and a fair number of FAAC and Mighty Mule units retrofitted onto original 1930s ironwork. We carry common replacement parts on our trucks, which is why most calls in Los Feliz are finished in one visit. The correct fix, not the closest guess.
Common Gate Repair Problems We See in Los Feliz Homes
- Gravity torque on steep grades: On driveways above a 10-15% grade, single-swing gates self-open or self-close as the hinges wear. The fix requires a high-torque operator with a mechanical brake, or a dual-swing conversion, not just new hinges.
- Deteriorating hinge anchors in aging stucco: Estate gates in the Los Feliz hills and the Los Feliz Estates tract are typically hung on pilasters built in the 1920s and 1930s. The anchors rot, the gate sags, and eventually the hinge straps pull free of the post.
- Santa Ana wind damage: Fall winds funneling down through the Griffith Park hillsides hit north- and east-facing estate driveways hard. We regularly see bent hinges and racked wooden infill panels after major wind events.
- Rust at the base rail on hillside lots: The wet-dry seasonal cycle in Los Feliz accelerates rust where runoff concentrates at the bottom rail of wrought iron gates, especially on lower hillside lots. A repair that ignores the drainage pattern won’t hold.
Pricing for Gate Repair in Los Feliz, CA
Gate repair in Los Feliz is priced by the job, not the hour, and you’ll know the number before any work begins. Here are the ranges we’ve seen and quoted across Los Feliz this year:
- Hinge replacement or hinge repair: $180-$420, depending on gate weight and whether the post anchor needs rebuilding.
- Gate realignment (single or double leaf): $220-$480.
- Operator or electric motor repair: $350-$850, including most replacement parts.
- Full operator replacement with slope compensation: $1,200-$2,400 installed, depending on gate weight and grade.
- Weld repair on ornamental ironwork: $150-$500 per section, matched to the original profile when feasible.
Several factors move a quote within these ranges: the weight of the gate, the pitch of the driveway, the condition of the post, and whether the hardware is standard or period-matched reproduction. Los Feliz pricing runs modestly higher than flatland neighborhoods because the work is heavier and the surfaces are older. To be clear: the quote is set before work begins and it doesn’t move. We also honor $50 off any repair over $250 and a permanent 5% senior and veteran discount. If you already have a written estimate from another company, we’ll give you a free second opinion on it.
We Also Serve Cities Near Los Feliz
Our service radius extends beyond Los Feliz to the surrounding communities, including Los Feliz and the nearby cities of West Hollywood, Beverly Hills, Silver Lake, and Echo Park. If you’re in one of those areas and need gate repair, the same crew standards, written promise, and upfront pricing apply.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Los Feliz
This is gravity torque. On a grade exceeding 10-15%, the weight of a single-swing gate continuously pulls the leaf downhill as soon as the hinges or operator brake start to wear. Once the hinge pins develop play, the gate swings free and the operator can’t hold it. The fix is either a high-torque operator with a mechanical brake and slope compensation, or conversion to a dual-swing configuration that splits the gravitational load. This failure is common on hillside streets above Franklin Ave and is rarely diagnosed correctly by flatland gate services. Call (442) 255-3886 for an exact diagnosis and price.
We match the repair to the existing ironwork, not the other way around. On a 1930s Spanish Colonial Revival estate in the Los Feliz Estates tract near Griffith Park, our crew rebuilt the hinge post on a heavy wrought iron swing gate whose anchors had deteriorated in aging stucco pilasters. We converted the sagging single leaf to a dual-swing configuration, installed a LiftMaster operator with a mechanical brake and slope compensation, and matched the new hinge straps to the original ornamental ironwork. The new gate closes square and still looks like it was hung in 1932. If original-style hardware is needed, we source or fabricate it. Estimates are free. Call (442) 255-3886.
Yes, and we see the evidence every fall. Santa Ana winds funnel down through Griffith Park and push hard against north- and east-facing estate driveways. A large swing gate is a sail. We regularly respond to calls after major wind events where hinges have bent, wooden infill panels have racked, or openers have stripped gears trying to hold position against the gusts. After a repair, we set the latching and brake to handle the next wind season. If your gate got shaken by a Santa Ana event, call (442) 255-3886 for an inspection.
Yes, and we do it regularly in Los Feliz. The operator has to be matched to the gate’s weight and the driveway’s slope. A period wrought iron gate on a hillside above Franklin Ave usually needs a high-torque operator with a mechanical brake, and frequently a dual-swing conversion to keep the load manageable. We service LiftMaster, FAAC, Mighty Mule, and six other major automation brands, so the operator recommendation is based on what works, not on what we happen to sell. The quote is fixed before work begins. Call (442) 255-3886.
Because the repair addressed the rust, not the water. On a hillside lot in Los Feliz, runoff concentrates at the bottom rail where the gate meets the lowest corner of the driveway. The wet-dry cycle pulls moisture into the iron, and surface rust returns within a season. The durable fix is to treat the metal, then address the drainage pattern so water doesn’t sit against the rail. A weld repair alone will fail again. We do both in one visit. For a written quote, call (442) 255-3886.
Contact Ironworks Gate Co. for Gate Repair in Los Feliz
If your gate is sagging, drifting, or dead, call (442) 255-3886. A live person answers, any time, any day. We’ll ask about your gate, your driveway, and what it’s doing. Then we’ll give you a straight answer, a fixed price, and a day we’ll be there. Every Los Feliz job is backed by the 90-Day Done Right Promise, written and without argument. No pressure, no surprises, no third callback. Just a gate that closes the way it should.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Feliz and surrounding communities with gate repair and automation for over 42 years.