Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Palms, CA
If your gate is stuck, sagging, or refusing to open, you already know the problem won’t fix itself. In Palms, gate repair calls almost always start the same way: a tenant can’t get their car out, a roller gave out years ago and nobody noticed until the track seized, or a landlord just inherited a deferred-maintenance headache from the previous owner. We answer the phone around the clock at (442) 255-3886, and our crews know Palms’s buildings, streets, and the particular ways old iron fails in this neighborhood. Most repair calls get a same-day or next-day visit, with the price quoted and agreed before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Palms Homeowners Choose Ironworks Gate Co.
Palms is mostly mid-century apartment stock and courtyard complexes, which means the person calling us is often a property manager juggling twelve other problems, or a long-term owner who bought when the building was new. They don’t want a handyman guessing at the problem. They want someone who has seen this exact failure before and carries the right part on the truck. Our techs work in Palms regularly, from the fourplexes near Motor Avenue to the courtyard buildings east of Overland, and we understand the rhythm of this neighborhood: the early-morning tenant calls, the parking garage gates that can’t wait, and the owners who need a written quote they can approve and be done with. Victor Salinas has built Ironworks Gate Co. around a simple idea: do the repair correctly the first time, write down what we did, and stand behind it. Every job carries our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions.
Gate Repair Services We Offer in Palms
Gate Repair
Worn hinges, sagging swing gates, rollers ground flat, latches that no longer catch. We repair the full range of iron and steel gate failures common to Palms’s older buildings. A typical repair call starts with a diagnosis on the spot, then we fix what’s broken and give you the price before any work starts. Learn more about our Gate Repair in Palms.
Gate Installation
We install driveway and pedestrian gates to fit the existing opening, the building style, and the way tenants actually use the gate. This is measured, ordered, and scheduled work, so we provide a free measure and a written price rather than a same-day promise. We handle the full scope, from the first measurement to the final hinge adjustment. Learn more about our Gate Installation in Palms.
Gate Motor & Opener
If the gate grinds, stops mid-travel, or won’t respond to the remote, the opener is usually the culprit. Our techs are factory-trained on LiftMaster, FAAC, BFT, and Mighty Mule systems, so the correct fix happens on the first visit. We diagnose the motor, the control board, the limit switches, and the safety edges. Learn more about our Gate Motor & Opener in Palms.
Gate Access Control
Keypads, card readers, intercom systems, and the wiring that ties them into an apartment or estate gate. In Palms’s rental-heavy market, access control problems are a daily reality. We repair, replace, and upgrade call boxes and entry systems to match how the building actually functions.
Gate Parts & Welding
Not every repair needs a whole new gate. We weld cracked frames, replace rollers and hinges, and rebuild the components that keep an older gate working for another decade. Our shop handles the metalwork the right way, which is why so many Palms property managers call us when a gate looks beyond saving.
Neighborhoods We Serve in Palms
Our crews work throughout Palms, and we’re typically able to reach any address in the neighborhood within the hour for emergencies. The areas we see most often include the apartment clusters near Motor Avenue, the courtyard buildings around Overland Avenue, the streets north of Venice Boulevard, and the older housing south of Palms Boulevard toward the Expo Line.
- Motor Avenue corridor
- Overland Avenue apartments
- North of Venice Boulevard
- Palms Boulevard area
- South Palms near the Expo Line
Why Palms’s Climate & Housing Affect Gate Repair
Palms sits about four to five miles from the Pacific, close enough that the daily marine layer works against every piece of exposed metal on a gate. Salt-laden moisture settles on hinges, rollers, and weld joints overnight, then dries in the morning sun. Do that several thousand times over sixty years and you get the Palms condition: surface rust that hides deeper pitting, corroded electrical connections on opener circuits, and weld joints that fail from the inside while the gate still looks fine from the street. This is the same pattern that makes gate repair in Palms different from inland LA neighborhoods. A gate that looks worn but serviceable often has internal corrosion that will only reveal itself when the hinge finally gives way or the roller disintegrates inside the track.
And the oldest gates in Palms are the ones that fail the most. The 1950s and 1960s wrought-iron sliding gates on underground parking entries are original equipment, and they have never had their rollers replaced. Once the bottom track fills with grit and corroded debris, the gate seizes mid-travel and blocks the parking entrance entirely. That is the single most common emergency call we get from Palms: a parking gate locked up at the worst possible time, with tenants stranded and somebody calling us on a Saturday morning. It is a deferred-maintenance problem baked into the neighborhood’s building stock, and we see it every week.
Pricing for Gate Repair in Palms
Most Palms gate repairs fall between $180 and $650, depending on what has failed. Here’s what you should expect:
- Roller replacement: $180 to $340 per gate, including parts and labor
- Hinge repair or replacement: $220 to $480 depending on gate weight and number of hinges
- Opener control board or limit switch: $250 to $550, including diagnosis
- Track cleaning and alignment: $160 to $300
- Weld repair on cracked iron: $200 to $500 depending on the extent of the crack
Every price is quoted and agreed before a single bolt gets turned. No surprise invoices. We also offer a free second opinion on any written estimate, $50 off any repair over $250, an $89 seasonal tune-up, and a standing 5% discount for seniors and veterans. Call (442) 255-3886 for a specific quote on your gate.
Service Area - Cities Near Palms
While our Palms crews work throughout the neighborhood, we also handle gate repairs in neighboring communities. We regularly serve West Hollywood, Beverly Hills, Los Feliz, and Silver Lake.
Serving Palms, CA - Our Local Coverage Area
We’re based in the Palms area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Palms
Gate repair in Palms typically costs between $180 and $650, with most jobs falling in the $220 to $480 range depending on whether the failure is a roller, hinge, opener component, or weld. We quote the exact price before any work begins, and you approve it first. Call (442) 255-3886 for a free estimate on your specific gate.
Yes. For emergency repairs, especially parking gates that are stuck or blocking vehicles, we dispatch a Palms-based crew as quickly as possible, often within the hour. Call (442) 255-3886 and speak to a live person, not a voicemail.
We do. Most of our Palms work is on the 1950s-to-1970s wrought-iron gates attached to dingbat-style apartment buildings and courtyard complexes. Those gates are usually original hardware that has seen minimal upkeep, and we are familiar with their failure patterns: seized rollers, stripped hinges, and corroded weld joints. We repair them without replacing the whole gate when the metal is still sound.
Yes. We service LiftMaster, FAAC, BFT, and Mighty Mule openers among others, and we can usually diagnose and repair an opener problem in a single visit. If the opener is repairable, we repair it. If it is beyond economical repair, we’ll show you why and give you a written replacement price. Call (442) 255-3886 to talk through what your gate is doing.
Every repair and installation we complete is backed by a written 90-day guarantee. If anything we fixed fails within 90 days, we return and correct it at no charge. No paperwork to file, no argument, no exception. That guarantee is part of every Palms job, in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Palms and the surrounding communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palms Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker