Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Palms
If you live in Palms and your gate has stopped closing, is grinding against the track, or has sagged so far it drags on the driveway, here’s what you need to know: most Palms gate repairs we handle are completed in a single visit, and a typical repair here runs $185 to $480 depending on the failure. We’ve worked on the mid-century courtyard gates and dingbat apartment entries that define this neighborhood for over 42 years as a company, and our technicians know exactly what breaks on these older wrought-iron and steel systems. The truth is Palms gates fail differently than gates in most of LA. The coastal air, the age of the original ironwork, and the heavy multi-tenant use combine into a specific set of failure patterns we see week after week. Call (442) 255-3886 any time, day or night, and a live person will answer. We’ll give you an honest diagnosis, a written price, and a straight answer about whether that 1965 gate is worth saving or has finally earned retirement.
Key Takeaways
- Most Palms gate repairs run $185 to $480, with emergency calls on underground parking slide gates at the higher end.
- Palms’s 1950s to 1970s apartment stock has unique failure modes: seized rollers, salt-corroded hinge posts, and obsolete control boards.
- We service LiftMaster, FAAC, Mighty Mule, BFT, and five other automation brands, and we stock common parts for Palms jobs.
- Every repair is protected by our written 90-Day Done Right Promise, and pricing is settled before any work begins.
- We answer the phone 24/7. No voicemail trees. Call (442) 255-3886 for a free estimate.
Why Ironworks Gate Co. Is Palms’s Preferred Gate Repair Company
Palms is a neighborhood of renters and small landlords, which means gate failures rarely get fixed the moment they start. A hinge begins to sag, a roller starts grinding, and nobody writes it up until a tenant is trapped or the gate has completely seized. By the time we arrive, the job is usually an emergency. We’re built for that. We dispatch crews to Palms from our Los Angeles office throughout the day, and our live phone line never rolls to voicemail. A real person answers at 3 p.m. and at 3 a.m., because a gate that blocks tenants from their own parking garage at midnight is not a Monday-morning problem.
Palms homeowners and property managers call us because we speak the language of this specific housing stock. We know that the wrought-iron swing gates on the courtyard complexes along Palms Boulevard and the numbered streets off Motor Avenue were hung when the buildings went up, and most have never had their hinge posts replaced. We know the underground parking slide gates on the dingbat apartments near Venice Boulevard seize from roller debris long before the motor gives out. And we know the salt-laden marine layer that rolls in most evenings is quietly eating at the weld joints on every exposed iron surface. That local knowledge means we don’t waste your time diagnosing. We’ve likely seen your exact failure on a nearly identical gate within the last month.
Victor Salinas, who leads our crews, has spent years working gates in neighborhoods like Palms, where the answer is rarely “replace everything.” It’s usually “rebuild what’s still solid, retrofit what’s missing, and tell the owner exactly what will fail next.” Victor’s approach is the same one we take on every job in Palms: give the homeowner or landlord a straight assessment, quote the work before touching a bolt, and stand behind it in writing.
Our Gate Repair Services in Palms
Here’s what we handle most often in Palms, and how it applies to the gates we actually see on this side of the Westside.
Electric Gate Repair
Palms has a large number of electric gates on rental properties, most installed in the 1990s or early 2000s and now running on control boards that are no longer manufactured. When those boards fail, the gate usually fails with them. The keypad goes dark, the remotes stop triggering, or the gate opens but won’t close. We carry replacement boards and retrofit kits for older operators, and we can often wire in a modern safety edge or photocell that the original install never had. A control board replacement in Palms typically runs $250 to $420, and a full keypad or radio receiver swap is usually $185 to $320.
Automatic Gate Repair
Automatic gate failures in Palms fall into two camps: motor failures and mechanical failures masquerading as motor failures. A gate that labors and trips its breaker is often dragging a seized roller or binding against a salt-swollen hinge post, not suffering from a dead motor. We test the mechanical load before replacing any electrical component, because putting a new motor on a gate with four seized rollers just burns out the next motor. When a motor does need replacement, we stock or can source same-week replacements for Swinging and sliding operators from Mighty Mule, FAAC, BFT, LiftMaster, and the other five brands we service. Typical motor replacement plus setup in Palms runs $450 to $800.
Hinge & Post Repair
This is the most common structural repair in Palms, and it’s the one that typically gets ignored until a gate is visibly sagging or dragging. The original hinge posts on 1950s and 1960s wrought-iron gates have been standing in coastal air for sixty years. The base of the post, where it enters the concrete or stucco, is usually the first section to rust through. We cut out the corroded section, weld in a new post sleeve or full replacement, and set the gate back to proper swing height. Hinge and post repair on a Palms walk gate averages $220 to $450. On a heavier driveway gate, plan for $380 to $650.
Gate Realignment
A gate that scrapes the ground, won’t latch, or rubs against the post may not need new parts at all. Often the hinges have simply loosened, the post has shifted in its footing, or the gate was never re-hung correctly after a previous repair. We realign swing and slide gates, reset hinge tension, and adjust the track position so the gate travels cleanly. Realignment in Palms typically runs $160 to $300, and it’s often enough to add years to a gate that looked ready for the scrap pile.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palms
We’re trained on nine gate-automation brands, and in Palms we see three more than any others: LiftMaster on the older condo and apartment entries, FAAC on the hydraulic swing operators, and Mighty Mule on the lighter residential driveway systems. We keep common control boards, photo-eyes, and remotes for those brands in our service vehicles, which means a Palms call rarely requires a second trip for parts. If you have an opener we don’t stock parts for, we order from our local distributors and usually have the part within two business days. The brand on the gate doesn’t determine whether we can fix it. The condition of the gate does.
Common Gate Repair Problems We See in Palms Homes
- Seized underground parking slide gates. The 1960s-era rolling gates on Palms’s dingbat apartment garages fail most often because the original rollers have never been replaced. Once the bottom track fills with rust debris and compacted grit, the gate stops mid-travel and blocks tenants. This is our single most common emergency call in Palms.
- Salt-corroded hinge posts. Palms sits close enough to the Pacific that the nightly marine layer deposits salt on exposed iron. Hinge posts that look fine from the driveway are often rusted through at the base, causing the gate to sag and bind even when the panel appears straight.
- Obsolete control boards. Thirty- and forty-year-old gate operators on Palms apartment buildings are running on boards that have been out of production for a decade. When they fail, tenants lose keypad access entirely. We retrofit these where possible, replacing the board and adding modern safety edges that the original system lacked.
- Weld joint fatigue. The original welded connections on wrought-iron gates from the 1950s through 1970s are reaching the end of their service life. We regularly find cracked or salt-eaten welds at the hinge plates and corner joints, even on gates that still operate. Repairing these welds before they fail is cheaper than emergency work after.
We got called to a 1960s courtyard complex off Palms Boulevard because the underground parking slide gate had seized mid-travel, trapping a tenant’s car. The bottom track was packed with corroded roller debris and compacted grit, and the original rollers had never been replaced since the building went up. Our crew pulled the gate, knocked out the seized rollers, cleaned the rack and pinion, and reinstalled new sealed-bearing rollers. We also added a safety photocell to the motor controller, because the old system never had one and the gate would close on a car without stopping. It took one visit. The gate has not seized since.
Pricing for Gate Repair in Palms, CA
Gate repair pricing in Palms is straightforward, and it’s lower than what you’ll typically pay in Beverly Hills or West Hollywood for the same work, mostly because Palms gates are older and simpler to access. A standard hinge adjustment or track realignment runs $160 to $300. Control board replacement is $250 to $420. Roller replacement on a slide gate runs $180 to $340, and a full roller and track rebuild on an underground parking gate is $350 to $600. Hinge post repair on a walk gate averages $220 to $450, and motor replacement ranges from $450 to $800. Every price is quoted and agreed before we start, in writing. There are no surprise line items, and you’ll never see a bill bigger than the quote. We also offer a free second opinion on any written estimate from another company, a $50 discount on repairs over $250, and a permanent 5% senior and veteran discount. Call (442) 255-3886 for an exact price on your gate, and we’ll give it to you over the phone or in person before any work begins.
We Also Serve Cities Near Palms
Our Gate Repair crews serve Palms and the surrounding Westside and central LA neighborhoods. If you own or manage property in West Hollywood, Beverly Hills, Los Feliz, or Silver Lake, we handle the same range of gate work there, from emergency slide gate unseizing to full automation retrofits. Learn more about our local coverage at Gate Repair in Palms.
Serving Palms, CA - Our Local Coverage Area
We’re based in the Palms area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Palms
Palms apartment gates seize mid-travel because the original rollers on 1960s and 1970s sliding gates have never been replaced, and over decades they disintegrate into metal fragments that pack into the bottom track. The gate then rides on compacted grit and roller debris, which makes the motor work harder until the gate stops moving entirely. This is a mechanical failure, not an electrical one, and it’s usually repairable in a single visit with new sealed-bearing rollers and a track cleaning. Call (442) 255-3886 if your Palms gate is stuck, and we’ll get a crew out to clear it.
Yes, usually. A 50-year-old Palms gate operator often has a perfectly serviceable motor but a control board that pre-dates modern safety standards and parts that are no longer manufactured. Adding a new control board, safety edges, and a photocell typically costs $350 to $650, which is far less than replacing the entire gate and operator. The answer is yes as long as the motor itself tests within spec. If the motor is also failing, replacement becomes the cheaper long-term answer. We’ll tell you which applies to your gate, honestly, before any work is quoted.
Gate sag on older Palms wrought-iron swing gates is almost always caused by corrosion at the base of the hinge post, where salt-laden marine air has been working on the iron for decades. The post weakens where it enters the concrete, the hinge plate tilts, and the gate droops. Sometimes the panel is still straight and the problem is only the post. We repair this by cutting out the corroded section and welding in a new sleeve or replacing the post entirely, then re-hanging the gate. It runs $220 to $650 depending on gate size and post condition.
No. Palms has a high concentration of absentee investment landlords and small property management companies, and gate maintenance on those rental properties is almost always reactive. A typical call comes after a tenant reports the gate stuck, dragging, or refusing to close, not after a scheduled inspection. That’s why we built our service model around same-day response and emergency availability. If you manage a building in Palms and want to avoid emergency calls, our $89 seasonal tune-up is designed exactly for that: we inspect hinges, rollers, track condition, and operator function before failures happen.
Palms sits roughly four to five miles from the Pacific, close enough that the daily marine layer deposits salt-laden moisture on exposed metal gate components. That accelerates surface oxidation, pitting on hinges and rollers, and corrosion of electrical connections, which happens faster here than in inland neighborhoods like the San Fernando Valley. Weld joints that look superficially sound are often salt-corroded underneath. We inspect for that specific damage pattern on every Palms job, because a weld that looks fine on the surface can be the next failure point. Call (442) 255-3886 for a free assessment.
Call Ironworks Gate Co. for Gate Repair in Palms
If your Palms gate is stuck, sagging, grinding, or dead, call (442) 255-3886. A live person answers, 24 hours a day, every day. We’ll ask a few questions, tell you what we think is wrong, and set a time to be there. The price is quoted and agreed before we start, and every job is covered by our 90-Day Done Right Promise in writing. We service Palms for exactly these gates: the mid-century iron, the dingbat slide gates, the automation that was old when the building changed hands. Done right, and backed in writing. That’s the deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Palms and the surrounding Los Angeles area.