Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across West Hollywood
The straight answer about gate parts and welding in West Hollywood: most hinge replacements on older apartment gates run $280-$520, post replacements in tight carport confines run $600-$1,400 depending on footing condition, and custom welding work is typically $150-$400 per repair section. We complete most welding and parts jobs in a single visit. If you’re dealing with a gate that sags, grinds, or won’t close, call (442) 255-3886 and a live person will answer, day or night.
West Hollywood isn’t like the suburban neighborhoods around it. Roughly 1.9 square miles of dense apartment buildings, most of them built between the 1950s and 1970s, and most of those with shared carport gates that serve a dozen or more tenants at once. When one of those gates fails, nobody in that building is parking securely until it’s fixed. We understand that urgency because we work in it every week.
Why Ironworks Gate Co. Is West Hollywood’s Preferred Gate Parts & Welding Company
Victor Salinas founded Ironworks Gate Co. in 1984, and for over 42 years the company has built its reputation one gate at a time. West Hollywood building managers and homeowners call us because they’ve learned the hard way that a general handyman doesn’t carry a welding rig or know the difference between a FAAC and a BFT control board.
Our technicians arrive in uniform, background-checked, and they work on your property the way they’d work in their own mother’s carport. We carry the parts stock needed for the gate operators most common in West Hollywood’s older buildings: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a 1970s Viking operator dies, we don’t guess. We know what it takes to retrofit it.
Every job carries our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions. That’s been the Keystone Standard on every gate job since day one.
Crews dispatch locally to West Hollywood, and scheduling is coordinated from our Los Angeles office. Most parts and welding calls in West Hollywood see a technician the same day.
Our Gate Parts & Welding Services in West Hollywood
This is the work we do every day across West Hollywood’s apartment courtyards, carports, and estate driveways. The full scope of our Gate Parts & Welding service includes more than what most people think of when they picture a gate repair. Here are the four jobs we handle most often in this city.
Hinge Replacement
On a 1960s courtyard building off Santa Monica Boulevard, rusted hinge barrels are why gates start dragging. West Hollywood’s marine layer keeps those hinges damp for months at a time, and once the metal starts flaking, the gate drops on that side and the operator strains harder until it burns out. We cut out the old hinge, weld in a heavy-barrel replacement with a grease fitting, and realign the gate so it swings true. Typical cost in West Hollywood: $280-$520.
Post Replacement
Post replacement is the job most people don’t expect until it’s already the problem. The hinge post rusts through at the footing, under the soil line where you can’t see it, and suddenly the whole gate leans and the operator jams. We pull the old post, set a new galvanized post in concrete, and have the gate re-hung the same day in most cases. Depending on footing depth and carport access, West Hollywood post replacements run $600-$1,400.
Rail Repair
Slide gates on older dingbat carports ride steel rails that sit inches above the ground, collecting moisture and grit. The rail rusts, the rollers chew through it, and the gate starts bucking. We cut out the damaged section, weld in heavy gauge replacement rail, and set the rollers so the gate moves smoothly again. Rail repair in West Hollywood typically runs $350-$800 depending on how much length has to come out.
Custom Welding
Some repairs can’t be ordered from a catalog. When an original 1960s gate has a picket rotted at the base, a rack section stripped in one spot, or a latch bracket broken off at an odd angle, we forge and weld the replacement piece on site. Custom welding lets us save a gate that would otherwise be scrapped, and in West Hollywood that matters because so many of these gates are original to buildings that owners want preserved. Custom work runs $150-$400 per section.
We also handle: Latch and lock replacement, gate roller replacement, and full gate hardware retrofits. If it’s metal and it’s on your gate, we work on it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
West Hollywood’s building stock predates most modern gate automation, which means we spend a lot of time retrofitting older operators and controls. We’re factory-trained on nine major brands, so when a 1970s Viking operator finally gives out, or a 1990s Mighty Mule has outlived every reasonable expectation, we know what fits and what doesn’t. We stock local parts in our Los Angeles warehouse for LiftMaster, FAAC, BFT, and the rest, which means faster turnaround for West Hollywood customers than an outfit that has to order everything in. Most parts are on the truck when we arrive.
Common Gate Parts & Welding Problems We See in West Hollywood Homes
- Marine-layer rust at the hinge post footing. Older iron slide gates in West Hollywood hold moisture at the post base for months at a time, turning what looks like a simple alignment job into a full post replacement in the tight carport confines of a dingbat building.
- UV degradation on south- and west-facing panels. Decades of direct sun bleach weatherstripping and powder-coat finishes until welds underneath are exposed and rust through, especially on gates hung before UL 325 required entrapment protection.
- Obsolete loop-detector systems and original wiring. Many 1950s-1970s West Hollywood buildings still run the original detector loops and cloth-wrapped wiring, which complicates modern part sourcing and often requires custom welding adapters to make a new control board talk to old hardware.
- Rusted slide rails under building carports. Slide gates that tuck under a building keep their rails close to the ground, where decades of wash water and damp air eat through them. This is one of the most common welding jobs we do in West Hollywood.
Pricing for Gate Parts & Welding in West Hollywood, CA
West Hollywood prices run slightly above surrounding suburbs because the work is denser and the access is tighter. Hinge replacements run $280-$520, post replacements $600-$1,400, rail repair $350-$800, and custom welding $150-$400 per section. If a gate needs work in multiple areas, we’ll break down the quote line by line before any work begins.
Any written estimate from another company is worth getting a second opinion on. We offer a Free Second Opinion on Any Written Estimate, and we’ll tell you honestly if the other quote is fair or if you’re paying for work that doesn’t need doing. Call (442) 255-3886 and we’ll schedule a look. The price is quoted and agreed before a single bolt is turned.
Standing offers for West Hollywood customers: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. All of it is backed by the 90-Day Done Right Promise.
We Also Serve Cities Near West Hollywood
Ironworks Gate Co. works throughout the corridor. We regularly handle gate parts and welding for customers in West Hollywood and the surrounding cities: Beverly Hills, Studio City, North Hollywood, and Culver City. Same crews, same written guarantee, same phone number.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in West Hollywood
West Hollywood runs its own Community Development Department, separate from LADBS, and gate permits for the city come through WeHo’s own portal. A contractor who pulls a permit through LA City’s system gets a stop-work notice that can delay a building’s only carport gate for weeks. We pull through the correct system every time, which keeps the job moving. Call (442) 255-3886 to get a repair scheduled without the paperwork stall.
In most West Hollywood cases, the answer is a new hinge post. Welding can patch a cracked barrel temporarily, but when a 1970s post has rusted through at the footing, the metal won’t hold a weld that’s worth the money. We’ll tell you straight which one you need. Call (442) 255-3886 for an honest on-site look.
If the old board is dead and no direct replacement exists, we retrofit a modern control board with custom wiring adapters, keeping the gate and operator in place when they’re still sound. That runs $500-$900 in most West Hollywood buildings, and it’s usually less than half the cost of replacing the whole operator. Call (442) 255-3886 and we’ll assess your gate’s specific vintage before quoting anything.
Usually not. Rail replacement and roller replacement done together runs $450-$950 in West Hollywood, and it fixes the mechanical problem without replacing the operator. The operator only gets replaced if it’s been damaged by the drag or if it’s already at the end of its life. Estimates are free, so call (442) 255-3886 before authorizing anyone’s full-system quote.
Same day in most West Hollywood cases. Our live phone support runs 24 hours a day, 7 days a week, and our crews dispatch to West Hollywood daily. No voicemail trees, no callbacks. Call (442) 255-3886 and a person answers.
Work With a Welder Who Knows West Hollywood’s Buildings
On a 1960s courtyard apartment building off Santa Monica Boulevard, we rebuilt a sagging slide gate whose original Viking operator had burned out after the hinge post rusted through at the footing. Our techs pulled the old post, set a new galvanized post footing, welded in a fresh rack section, and retrofitted a LiftMaster operator with a safety photocell, all through WeHo’s own permit portal. The building’s dozen tenants had secure parking back by the same evening.
That’s the kind of job this city asks for. Old gates, tight carports, and a permit system that punishes out-of-town guesses. We work in it every week, and we’ll be here for another forty years.
Call Ironworks Gate Co. at (442) 255-3886 for a free estimate on gate parts and welding in West Hollywood. A live person answers, and the price is settled before we start.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving West Hollywood since 1984.