Ghost Controls Gate Installation Nationwide

Ghost Controls Gate Installation in West Hollywood: What to Know First

Ghost Controls gate installation in West Hollywood typically runs between $850 and $2,400 depending on whether we’re mounting a new opener on an existing gate, pairing it with a fresh gate build, or replacing a failed unit on a hillside driveway. We install and service every Ghost Controls line, from the standard AXDP and AXD series to the heavy-duty TSS1 and TDS2, and most jobs are done in a single visit. You’ll know the full price before we turn a single bolt, and every Ghost Controls installation carries our written 90-Day Done Right Promise.

Call (442) 255-3886

This page is for West Hollywood homeowners who already own Ghost Controls equipment, or are considering it, and want a straight answer on installation. Victor Salinas founded Ironworks Gate Co. in 1984, and we’ve installed enough Ghost Controls openers across West Hollywood to know exactly where they shine and where they need extra care. If you’re standing in the driveway looking at a gate that won’t budge, call us at (442) 255-3886. A live person answers, day or night.

Key Takeaways

• We install every Ghost Controls opener line: AXDP, AXD, TSS1, TDS2, and the R Series.
• Most Ghost Controls installations in West Hollywood are completed in one visit, with the price settled upfront.
• We’re an independent Ghost Controls service provider, not an authorized dealer, which means we fix what’s actually wrong rather than defaulting to warranty workarounds.
• Every job is protected by our written 90-Day Done Right Promise.
• Call (442) 255-3886 for a free estimate. A live person answers, 24/7.

How Ghost Controls Products Fail, and How We Fix Them

Ghost Controls builds a solid opener at a fair price, but after four decades of gate work in West Hollywood we’ve learned where each series tends to struggle. Here are the failure modes we see most often, with our fixes.

• AXDP arm binding on out-of-square gates: The AXDP series uses a direct-drive arm that’s unforgiving when the gate post has shifted. West Hollywood’s clay-heavy soil expands and contracts with the seasons, and older gates on the flats or in the hills settle out of square. The arm binds, the motor strains, and the limit switches never quite learn the travel. We square the gate, re-shim the post, and only then mount the opener. Skipping the square step is the most common mistake we see from handyman installs, and it’s why so many Ghost Controls units eat their own gearboxes within a year.
• AXD series receiver drift: The AXD and AXDG models use a 318 MHz receiver. It’s dependable, but the receiver board on early AXD units can drift off frequency after two or three hot summers. West Hollywood heat is not kind to plastic-housed control boards. The symptom looks like a dead remote, and the fix is either a reflash of the receiver or a swap to the updated board. We keep both in the truck.
• TSS1 and TDS2 solar draw issues on shaded driveways: Ghost Controls markets these for solar use, and on a hillside driveway with full sun they’re fine. But half the driveways in West Hollywood sit under mature ficus or jacaranda trees, and the panel never gets enough light. The battery drains, the gate opens halfway, and the owner thinks the motor is failing. We re-spec the solar panel placement or convert the system to line voltage where feasible. It’s a $200 fix for a problem that looks like a $900 replacement.
• TSS1 limit switch wear on heavy gates: The TSS1 is rated for gates up to 20 feet and 1,600 pounds, but a solid steel driveway gate in West Hollywood can easily push that. When the limit switch wears, the gate overtravels and slams the stop. We replace the switch with the OEM part and adjust the travel so the gate decelerates before contact. It’s a one-visit repair.
• R Series gate sensitivity false trips: The R Series has adjustable obstruction sensitivity, and it’s a good feature until it’s too tight. A gate that reverses halfway for no reason, usually at dusk or dawn, is almost always a sensitivity setting tuned too high. The gate reads temperature change as resistance. We set the sensitivity to the manufacturer’s spec, test it with a real obstruction, and the problem disappears.

As an independent Ghost Controls service provider, we’re not bound to a script. When an OEM part is the right call, we use it. When a quality aftermarket component does the same job for less, we tell you and let you decide. That’s the square deal, and it’s how we’ve kept West Hollywood gates closing properly since 1984.

Our Ghost Controls Gate Installation Process

1. 1
   The phone call: You call (442) 255-3886. A live person answers, asks a few questions about your gate and which Ghost Controls model you have, and schedules a time that works.
2. 2
   The driveway inspection: We arrive in uniform, check the gate’s square, the post integrity, the electrical run, and the condition of your existing Ghost Controls unit. Victor Salinas has been reading gates this way since he was a kid watching his uncle weld ornamental iron on Melrose Avenue. We tell you what we find before we tell you what it costs.
3. 3
   The written price: We quote the job in writing, before any work starts. You approve it, and only then do we touch a tool.
4. 4
   The install: We mount the opener, run the power if needed, set the limits, tune the sensitivity, and pair your remotes and keypad. If the job needs welding or a hinge replacement, that happens in the same visit.
5. 5
   The test: We cycle the gate twenty times or more, check the battery backup if you have one, and make sure the safety edges and obstruction reversal work exactly as Ghost Controls intended.
6. 6
   The guarantee: We walk you through what we did, leave the job site clean, and hand you the written 90-Day Done Right Promise. If it’s not right, we come back and make it right.

What Ghost Controls Gate Installation Costs in West Hollywood

Here are honest numbers for the Ghost Controls work we do in West Hollywood. These are installed prices, including labor and parts, and they’re quoted before we start.

• Ghost Controls opener installed on an existing working gate (AXDP or AXD): $850 to $1,300, depending on the arm length and whether we need to square the gate first.
• Full installation with new gate and Ghost Controls opener: $2,400 to $5,500, depending on the gate size, material, and whether we’re welding a custom frame or hanging a pre-fab gate.
• Ghost Controls opener replacement on a failed unit: $950 to $1,600, including pulling the old unit, reusing what’s solid, and running a fresh calibration.
• Solar conversion or line voltage run: $200 to $600, depending on the distance from the panel to the gate and whether trenching is needed.

What moves the price is the gate’s square, the power situation, and whether the post needs rework. We tell you all of it before you commit. Call (442) 255-3886 for a free estimate, and remember the 5% Senior and Veteran discount on every job.

Why West Hollywood Homeowners Call Ironworks Gate Co. for Ghost Controls Work

Because we’ve been doing this in West Hollywood for over 42 years, and a lot of the homeowners we serve remember the last contractor who didn’t show. We show. A live person answers the phone 24 hours a day, seven days a week. The technician who arrives is background-checked, uniformed, and trained on Ghost Controls along with eight other brands: LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. If your Ghost Controls opener fails and you decide to switch brands, we can talk you through that honestly instead of pretending only one brand exists.

We stand behind every Ghost Controls installation with the written 90-Day Done Right Promise, known inside the company as the Keystone Standard. No paperwork on your end, no arguing, no exceptions. The 400th job gets the same care as the first, and that’s not a slogan. That’s how Victor Salinas built the company, one driveway at a time. If the gate’s giving you trouble, let’s take a look at it. No guessing, no upselling, just a straight answer.

FAQs