Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Hollywood
A broken gate in North Hollywood does not wait for a convenient time, and neither do we. Whether you manage a garden-court apartment building off Vineland Avenue or own a 1950s bungalow near Lankershim, the same question applies: can someone fix this today? We answer that question with a straight answer. Gate repair in North Hollywood is our daily work, not a side job. Call (442) 255-3886 and a live person picks up, 24 hours a day, 7 days a week.
Most North Hollywood gate repairs are completed in a single visit. The price is quoted and agreed before a single bolt is turned. We are the dedicated gate specialist, not a generalist handyman. That distinction matters when a 30-year-old operator quits on a 106°F afternoon and tenants are stuck outside.
Why Ironworks Gate Co. Is North Hollywood’s Preferred Gate Repair Company
North Hollywood homeowners and property managers call us because we show up knowing the street, not just the address. The area has one of the densest concentrations of 1989-1995-era electric slide gate operators anywhere in the Valley, and we carry the obsolete control boards and cross-reference data that generalists simply do not. When a DoorKing or Linear unit from 1992 dies on a dingbat apartment complex, we know that part was discontinued a decade ago. We also know what replaced it.
Our response time to the 91601, 91602, and 91603 ZIP codes is measured in hours, not days. A live person answers every call. Our technicians are background-checked and uniformed. They work in your building the way they would work in their own mother’s. And every job carries the written 90-Day Done Right Promise, known internally as the Keystone Standard. If it is not right, we come back and make it right. No paperwork. No arguing. Every time.
Our Gate Repair Services in North Hollywood
Electric Gate Repair
North Hollywood’s electric gate systems run hotter and longer than most of LA. Valley heat plus 30-year-old wiring means control boards, transformers, and safety edges fail in clusters here. We diagnose the actual fault, not the guess. That means testing the board, the motor, the loop detector, and the edge sensor before quoting anything. Then you get a written price, and you approve it before we turn a wrench.
Automatic Gate Repair
Automatic gate repair in North Hollywood often comes down to one of three things: a dead control board from heat fatigue, a stripped gear from a heat-swollen slide frame, or a sensor that never gets recalibrated after years of daily cycles. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whatever is on your driveway, our techs have trained on it. Most automatic gate repairs are finished the same day.
Hinge & Post Repair
This is where North Hollywood’s housing stock shows its age. Single-family bungalows from the 1940s through the 1960s often have ornamental wrought iron swing gates with original hinges seized solid or pulling away from soft stucco posts. When a gate sags and scrapes the driveway, the hinge is rarely the only problem. The post footing usually failed first. We cut out the bad post, reset it in concrete, and hang the gate square. Then it stays square.
Gate Realignment
A slide gate that binds in the afternoon but rolls free at night is a classic North Hollywood symptom. Steel frames expand in Valley heat, the rack and pinion goes out of spec, and gears strip if it keeps running misaligned. We realign the track, adjust the rollers, and set the rack clearance correctly for the heat it actually runs in. Not the heat it was installed in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For North Hollywood customers, that range matters more than anywhere else in LA. The 1989-1995 apartment gate operators installed along Lankershim Boulevard and Vineland Avenue were mostly Linear, DoorKing, and early Viking units. We keep Valley-specific bench stock for those exact models, including rebuilt control boards and cross-referenced part numbers that disappeared from catalogs years ago. That is the difference between a same-day fix and a week of tenants waiting.
Common Gate Repair Problems We See in North Hollywood Homes
- Obsolete control boards on 1990s apartment operators: These units are all hitting 30+ years of Valley heat service at the same time. Original part numbers have been discontinued for a decade, so cross-referencing and rebuilt boards are daily work here.
- Seized or pulled-away hinge posts on 1940s-1960s wrought iron swing gates: Soft stucco posts were never meant to hold 200 pounds of iron for sixty years. Sag correction fails if the footing is not redone along with the hinge.
- Heat-swollen steel slide frames binding in aluminum tracks: The frame expands in the afternoon sun, the rack and pinion alignment shifts, and gears strip when the operator keeps pushing. Free movement gets restored only when the gear rack is reset to the correct clearance.
- Wind damage from Santa Ana events: Valley corridors funnel wind hard enough to slam unlatched swing gates, bend frames, shear hinge welds, and knock posts out of plumb. It happens every fall and winter.
We got called to a garden-court complex off Vineland Avenue where a DoorKing 9150 slide gate operator from 1992 had a dead control board after a 107°F afternoon. Our tech pulled the obsolete logic board, cross-referenced the discontinued part number from our Valley-specific bench stock, and had the gate running that evening with a rebuilt board. Three hundred dollars cheaper than a new operator, and no downtime for tenants. That is a regular Tuesday in North Hollywood.
Pricing for Gate Repair in North Hollywood, CA
Here are real numbers for North Hollywood, not vague ranges designed to avoid commitment. Electric gate repair typically runs $180-$420, depending on whether it is a sensor, a transformer, a control board, or a motor. Hinge and post repair on a wrought iron swing gate averages $350-$750 when a post needs to be reset in concrete. Gate realignment runs $150-$350. Full operator replacement on an apartment slide gate starts around $1,200 and goes up with the brand and the length of the gate. Every price is quoted and agreed before work starts. No surprises on the bill.
Standing offers for North Hollywood customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (442) 255-3886 for an exact quote. Estimates are free.
We Also Serve Cities Near North Hollywood
Our Gate Repair team serves the surrounding San Fernando Valley and LA basin, including Studio City, Sherman Oaks, West Hollywood, and Beverly Hills. If you are in one of those areas, the same technicians, the same written promise, and the same live phone support apply. Gate Repair in North Hollywood remains our focus, and our Valley bench stock stays stocked for the gates this area actually runs.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Hollywood
They were installed in the same 1989-1995 window, and they have all survived the same 30 years of Valley heat. Control boards and capacitors do not fail on a schedule, but when an entire install generation shares identical age and identical heat load, cluster failures are exactly what happens. We carry rebuilt boards and cross-reference discontinued part numbers for the Linear, DoorKing, and Viking units from that era, so most can be repaired for hundreds less than a full operator replacement. Call (442) 255-3886 and tell our team the brand and model on the housing. We will tell you straight whether it can be repaired or whether replacement is the cheaper long-term answer.
In most cases it can be fixed, and the repair usually outlasts a replacement gate hung on the same bad post. The sag is almost always a hinge problem, and the hinge problem is almost always a post problem. A 1960s stucco post was never designed to hold a heavy iron gate for sixty years. We reset the post in concrete, replace the hinges, and hang the gate square. If the gate itself is rusted through or bent beyond correction, we will say so plainly. You will know before any work begins.
Because the steel frame expands in heat and the aluminum track does not expand at the same rate. The gate physically grows wider in the afternoon, and the rack and pinion alignment shifts out of spec. If the operator keeps pushing a bound gate, gears strip. The fix is a realignment done for the heat it actually runs in, not a cool-morning adjustment that fails again by 2 p.m. Call (442) 255-3886 and we will check the track, rollers, and rack clearance. Most heat-binding jobs are repaired in one visit.
In many cases, yes, but not all cases. Photo eyes, edge sensors, and loop detectors can often be added to older operators if the control board has the right inputs. Some 1989-1995 units, especially early Linear and DoorKing models, have boards that simply cannot accept modern safety edges, and at that point replacing the operator is the only way to meet current safety standard. We will show you the exact board input diagram and explain your options in plain English. You decide. A retrofit can be done safely and correctly on most 1990s units, and we will tell you honestly when it cannot.
It is usually one of three things, sometimes two at once. The hinges sheared, the post shifted out of plumb, or the frame bent at the latch point. A wind-loaded gate snaps fast at the weakest connection, and that is almost always the hinge weld or the post footing. We come out, assess the hinge, the post, and the frame, and quote the repair before we touch it. Most wind damage on North Hollywood swing gates is repairable in a single visit. Call (442) 255-3886 and we will get it closing square again.
Call Ironworks Gate Co. for Gate Repair in North Hollywood
When your gate fails on a hot Valley afternoon, you want a company that knows the part number, carries the board, and stands behind the work in writing. That is us. Ironworks Gate Co. has been doing this work right for over 42 years, and we plan to be in town for another forty. Call (442) 255-3886 for a free estimate. A live person answers, any hour, any day. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Hollywood with dedicated gate repair, installation, and automation service. Dispatch and scheduling are coordinated from our Los Angeles office; crews serve North Hollywood locally.