Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Hollywood
Gate parts and welding repair in North Hollywood usually comes down to one of three failures: a hinge that has seized or pulled from the post, a steel frame that has rusted through at a weld, or a slide gate that binds in its track when afternoon heat hits. We fix all three, most often in a single visit. If your gate is sagging, scraping, or the operator is straining, call us at (442) 255-3886. We answer live, 24 hours a day, and we will give you an upfront price before any work starts.
We have been welding and rebuilding gates for over 42 years, and we work on North Hollywood properties every week. We know this area’s gates. We know the dingbat apartment complexes along Lankershim, the garden courts off Vineland, and the 1940s bungalows on the side streets with original wrought iron still hanging. We know what fails first and what actually lasts here.
Why Ironworks Gate Co. Is North Hollywood’s Preferred Gate Parts & Welding Company
North Hollywood homeowners and property managers call us because we show up when we say we will, and we stand behind the work in writing. Every job carries our 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing. That has been our policy since 1984, and it applies to every hinge, post, weld, and rail we touch in North Hollywood.
Our technicians are background-checked and uniformed. They work on your gate the way they would work on their own mother’s. And when you call, a live person picks up. Not a voicemail tree, not an answering service. That matters when your apartment gate is stuck open on a Friday night and tenants are calling you.
We are equipped for the specific problems this part of the Valley throws at gates. Our crews carry stainless hardware, powder-coated posts, and a deep inventory of obsolete logic boards for older operators that still run on hundreds of North Hollywood apartment buildings. Victor Salinas leads our team, and he has spent decades learning what happens to metal and motors when the San Fernando Valley heat does its work year after year.
Our Gate Parts & Welding Services in North Hollywood
Hinge Replacement
Hinges are the first thing to fail on a wrought iron swing gate in North Hollywood. Decades of 105°F afternoons embrittle the metal, and Santa Ana winds finish the job. A hinge that has pulled away from a stucco post, or cracked at the barrel, will not self-correct. We cut out the old hinge, weld in a heavier replacement, and anchor it to the post with hardware that can hold against the next wind event. If the post itself is compromised, we tell you before we touch it. You get the full picture, not a surprise on the invoice.
Post Replacement
Gate posts in North Hollywood take abuse from three directions: irrigation runoff at the base, heat cycling through the steel, and the constant weight of a gate that has drifted out of adjustment. On a Lankershim Boulevard garden-court complex, our crew replaced a seized hinge post on a 1990s slide gate where the original galvanized post had corroded at the base from years of irrigation runoff and heat cycling. We cut out the old post footing, installed a new powder-coated post with stainless hardware, and realigned the rack and pinion so the DoorKing operator stopped erroring out. That is the difference between a post swap and a post replacement done properly. We dig, set, grout, and align. The gate closes like it was hung yesterday.
Rail Repair
Slide gates in North Hollywood run on aluminum track, and aluminum track expands and contracts at a different rate than the steel gate riding on it. Afternoon heat on a Valley summer day can make a steel slide gate frame expand until it binds in the track. The operator motor then works twice as hard, overheats, and throws error codes. We realign track, replace worn rail sections, and build in the clearance these gates need to move freely at 106°F and at 45°F. When the rail is right, the motor stops fighting the gate.
Custom Welding
Not every gate repair matches a catalog part. When a 1960s ornamental gate has a fractured scroll or a steel frame has rusted through at a corner weld, we fabricate the replacement piece in the truck and weld it in place. We weld galvanized steel, powder-coated steel, and wrought iron. We match the existing profile so the repair does not look like a patch. North Hollywood’s older single-family bungalows have a lot of one-off ornamental work that deserves a welder who respects the original design, not a parts-swapper looking for the closest match.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
We service and repair all the major gate operator brands you will find on North Hollywood properties, including LiftMaster, Mighty Mule, FAAC, and BFT. More importantly for this neighborhood, we carry the parts that older apartment gates still need. A Linear or early Viking operator installed in 1990 does not take the same logic board as a new unit, and we cross-reference discontinued part numbers daily. When your gate opener fails, we do not tell you to upgrade because we cannot find a board. We find the board, or we tell you straight if it is truly at end of life. For Gate Parts & Welding work of any scope, our trucks leave the yard stocked for the common failures and the uncommon ones.
Common Gate Parts & Welding Problems We See in North Hollywood Homes
- Rust at welds and hinge points from UV breakdown. North Hollywood’s summer sun is relentless on powder-coat finishes. Once the coating fails at a weld bead or hinge barrel, bare steel rusts fast. We grind back to clean metal, weld as needed, and re-coat with a finish that handles Valley UV.
- Sheared hinge welds after Santa Ana wind events. Unlatched swing gates catch wind like a sail. When a Santa Ana blows through the Valley corridors, we get calls for gates slammed so hard the hinge weld sheared clean off or the post leaned out of plumb. We repair the hinge and often add a heavy-duty latch or drop rod so it does not happen again.
- Slide gates binding in aluminum track during afternoon heat. The steel expands, the track does not, and the gate seizes up around 3 p.m. in August. The operator motor overheats, the circuit board faults, and the gate stops working at the exact time tenants are coming home. We adjust track clearance and replace worn rail sections to stop the bind.
- Obsolete operator boards on 30-year-old apartment gates. North Hollywood’s wave of electric gate retrofits in the late 1980s and 1990s means a large cohort of Linear, DoorKing, and early Viking operators are now failing in clusters. We carry and cross-reference the obsolete boards these gates need. This is everyday work for us here, not a special order.
Pricing for Gate Parts & Welding in North Hollywood, CA
You should know what to expect before you call. Here is what gate parts and welding work typically costs in North Hollywood:
- Hinge replacement: $180-$420 per hinge, depending on weight, post condition, and whether we weld in place or replace the post anchorage.
- Post replacement: $350-$850 per post, including cutting out the old footing, setting the new post, grouting, and realigning the gate.
- Rail repair or track realignment: $220-$600, depending on how much rail section needs replacement and how far the gate has drifted.
- Custom welding repair: $150-$550 for most ornamental cracks, broken welds, or fabricated replacement pieces. Larger structural work is quoted after we see the gate.
Every price is quoted and agreed before we start. You will know the number, in writing, before a bolt is turned. We also offer a free second opinion on any written estimate from another company, $50 off any repair over $250, and a permanent 5% discount for seniors and veterans. Call (442) 255-3886 for a free estimate on your North Hollywood gate.
We Also Serve Cities Near North Hollywood
Our crews cover all of North Hollywood and the neighborhoods around it. We regularly work in Studio City, Sherman Oaks, West Hollywood, and Beverly Hills. If your property sits close to the Valley line or over the hill, call us anyway. Scheduling is coordinated from our Los Angeles office, and our service area covers the whole central LA corridor.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Hollywood
Because hundreds of them were installed in the same 1989-1995 window, and 30-plus years of Valley heat service on the same components produces the same failures at roughly the same time. A huge cohort of Linear, DoorKing, and early Viking operators in North Hollywood are now failing on the same original logic boards and power supplies. We stock and cross-reference the obsolete parts these gates need, so the repair usually happens on the first visit, not after a two-week special order. If your complex gate is acting up, call (442) 255-3886.
If the gate scrapes or clunks as it moves but the post is still plumb, the rail or rollers are usually the problem. If the post itself is leaning, rusted at the base, or visibly pulling away from the gate, you need a post replaced before any rail work will hold. We will tell you which one you need and quote both honestly. The price is set before we start.
For gate hardware that must survive 105°F summers and intense UV, galvanized steel with a powder-coat finish and stainless fasteners is the specification that actually lasts in North Hollywood. Painted mild steel will rust at the welds and hinge points once the coating cracks, which happens fast in this climate. When we replace posts, hinges, or repaired sections, we use galvanized or powder-coated material with stainless hardware, because we want the repair to outlast the original.
Check the hinge plates where they meet the post, and look for any gap or movement at the weld points. If the gate drags on the ground, the post has likely shifted or the hinge has bent. Also check the latch. If the wind unlatched the gate once, it will do it again, and the next slam may shear the hinge weld entirely. We can repair the hinge and add or upgrade the latch in the same visit. Call (442) 255-3886 and we will come look.
Yes. Every automatic gate operator we install or repair in North Hollywood must meet current safety standards for entrapment protection, which typically means photo eyes, safety edges, or both depending on the gate type and the operator. This is not optional, and we will not put an operator back into service without the required safety devices functioning. When we rebuild a gate or replace hardware on an automated gate, we verify the safety system is working before we leave. High-voltage wiring and heavy moving gates are genuinely dangerous, and this is work for a trained professional.
If your gate is sagging, scraping, or the operator will not stop erroring out, call us at (442) 255-3886. We will come to your North Hollywood property, give you an upfront price in writing, and stand behind the work with our 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Hollywood since 1984.